 
  
 
 
|
CONFIGURING
YOUR WINDOWS 95 PC FOR BQLINK INTERNET ACCESS
Installing
network components
| 1. |
Open
the CONTROL PANEL. Double-click the NETWORK icon. |
| 2. |
Click
the ADD button. |
| 3. |
Click
CLIENT. |
| |
| • |
At
the MANUFACTURERS section, select MICROSOFT; |
| • |
At
the right side, select CLIENT for MICROSOFT NETWORK.
|
| • |
Click
OK. |
|
| 4. |
Click
ADAPTER. |
| |
| • |
At
the MANUFACTURERS section, select MICROSOFT; |
| • |
At
the right side, select CLIENT for MICROSOFT DIALUP
ADAPTER. |
| • |
Click
OK. |
|
| 5. |
Click
PROTOCOL. |
| |
| • |
At
the MANUFACTURERS section, select MICROSOFT; |
| • |
At
the right side, select TCP/IP. |
| • |
Click
OK. |
|
| 6. |
Highlight
TCP/IP, select PROPERTIES. |
| |
| • |
Click
the DNS CONFIGURATION tab. |
| • |
Type
anything on the Host text box. This is going to
be the name of your host computer. |
| • |
For
the DOMAIN field, type mozcom.com. |
| • |
Check
the button for ENABLE DNS (optional; do not activate
this if using more than one ISP). At the DNS
SEARCH ORDER, add the following series of numbers
in the proper sequence: |
| |
•
202.47.132.1
•
202.47.132.6 |
| • |
Click
OK. |
|
| 7. |
Click
OK until you exit the NETWORK icon. This will copy files
from your Windows 95 installation CD or setup diskette
to your hard disk.. |
| 8. |
Windows
will then prompt you to restart your computer. |
| |
Back
to Top |
|
Installing
dialup networking in Windows 95
The assumption
is that the user has already installed the necessary network
components in Windows 95. If not, proceed first to the section
on Installing Network Components.
| 1. |
Go
to the CONTROL PANEL. Double-click ADD/REMOVE PROGRAMS. |
| 2. |
Highlight
COMMUNICATIONS. Click DETAILS. Another dialog box will
pop up. |
| 3. |
Check/Select
DIALUP NETWORKING. This will create a DIALUP NETWORKING
folder in the MY COMPUTER group. |
| |
Back
to Top |
|
Creating
dialup numbers
You may create as many dialup icons as you want,
one for each dialup number. You may also place these copies
of these icons (shortcuts) on your Windows 95 Desktop.
| 1. |
From
the DIALUP NETWORKING folder, double-click MAKE NEW CONNECTION. |
| 2. |
Setup
the autotrunk Dialup Numbers
to connect to the BQLink MozCom server. |
| 3. |
Type
the title as "BQLink Internet <dialup number>"
where <dialup number> is one of the numbers
in our Dialup Numbers. |
| 4. |
Verify
if the proper modem is indicated in the MODEM field. If
not, configure the correct modem you have installed. |
| 5. |
Click
the CONFIGURE button. |
| |
| • |
In
the next dialog box, click the OPTION tab. |
| • |
Select
(check) the BRING UP TERMINAL WINDOW AFTER DIALING
option. |
| • |
Click
OK until you return to the MAKE NEW CONNECTION dialog
box. |
| • |
Click
NEXT. |
|
| 6. |
Supply
the AREA CODE (if necessary), the TELEPHONE NUMBER, and
the COUNTRY CODE (set it to Philippines as "63").
Click NEXT. |
| 7. |
Click
FINISH. An icon will be created for the dialup number
you just set up. |
| 8. |
Highlight
the icon, then right-click. Select the PROPERTIES command
from the pop-up menu. |
| |
| • |
Deselect
(clear) the USE COUNTRY CODE AND AREA CODE option. |
| • |
Click
OK. |
|
| 9. |
Click
on SERVER TYPE. |
| |
| • |
Deselect
LOGON TO NETWORK. |
| • |
Deselect
USE ENCRYPTED PASSWORD. |
| • |
Deselect
NETBUI. |
| • |
Deselect
IPX/SPX. |
|
| 10. |
Click
on TCP/IP Settings. |
| |
| • |
Select
Use Server Name Addresses. |
| • |
At
the PRIMARY DNS, type 202.47.132.1. |
| • |
For
the SECONDARY DNS, type 202.47.132.6. |
|
| 11. |
Keep
clicking OK until you close the dialog boxes for that
dial-up number. |
| |
Back
to Top |
Connecting to the MosNet server (mozcom.com)
Make
sure that your modem has been properly set up in Windows 95
and that it is already connected to a telephone line.
| 1. |
Double-click
the shortcut icon of any of the dialup numbers. If you
don't have the shortcut on your Desktop: |
| |
| • |
Open
the MY COMPUTER folder. |
| • |
Double-click
the DIALUP NETWORKING folder. |
| • |
Double-click
any of the dialup numbers that have been set up.
|
|
| 2. |
The
CONNECT TO dialog box will be displayed. Click CONNECT. |
| 3. |
The
POST-DIAL TERMINAL screen will be displayed asking for
your USERNAME and PASSWORD. Type these items as needed. |
| 4. |
If
the supplied items are correct, the "peak>"
prompt will be displayed. When this prompt appears, type
PPP and press [Enter]. |
| 5. |
Garbage
characters will be displayed and then a message informing
you of the IP Address that is assigned to you for this
session. Click the CONTINUE button or press [F7]. |
| 6. |
The
system will then verify your USERNAME (USER-ID) and PASSWORD.
If they are valid, you will be connected. A dialog box
will pop up to inform you when the connection occurs. |
| |
Back
to Top |
|
© Copyright
2001. Bohol Quality Corporation.
All rights reserved. |
|
|
